Pendulum impact tester verification: what ISO 148-2 checks
An impact tester needs more than a dial check. Here is what direct and indirect verification under ISO 148-2 covers and why both matter.
Ameet Kudche |
News
Pendulum impact tester verification: what ISO 148-2 checks
-
The Vickers hardness test principle: force, indentation and measurement
The Vickers hardness test principle is to press a diamond indenter into a prepared surface with a specified force, measure the two diagonals of the resulting square-shaped impression, and calculate...
Akuracy |
-
Navigating the Precision Landscape: Selecting a Tensile Testing Machine with Proven Experience
In the realm of material testing, precision equipment is not just a requirement—it's a cornerstone of credible results and operational efficiency. Selecting the right machinery can be daunting, but understanding...
Madhav Shastri , Material Science Expert |
-
Testing TMT rebar to IS 1786: tensile, bend and rebend on a UTM
How construction and rolling-mill labs test TMT bars to IS 1786: tensile properties, bend and rebend tests, gripping and records.
Ameet Kudche |
-
Working principle of a Rockwell hardness testing machine
The rockwell hardness testing machine working principle is based on measuring how far an indenter penetrates a specimen under a defined force cycle.
Akuracy |
-
Portable hardness testing: when to test on site and how to get reliable readings
Some parts are too big or too valuable to bring to a bench tester. Here is how portable hardness testing works and how to keep field readings reliable.
Ameet Kudche |
-
Minimum specimen thickness for a Charpy test
The answer to “what is the minimum thickness required for a Charpy test” depends on the governing standard and whether it permits a sub-size specimen.
Akuracy |
-
Building Long-Term Success: Prioritizing Longevity and Reliability in Dynamic Balancing Machines
In an era where technology evolves at a rapid pace, ensuring the longevity and reliability of industrial equipment is crucial for sustained business success. This is particularly true for dynamic...
Madhav Shastri , Material Science Expert |
-
IS 1608 tensile test of metals: procedure, specimen and report
What IS 1608 Part 1 covers, how specimens and gauge lengths are chosen, how the test is run on a UTM and what a compliant report should include.
Ameet Kudche |
-
Seven checks for choosing a digital Rockwell hardness testing machine
A digital Rockwell hardness testing machine should match the scales and samples you test, provide a controlled test cycle, and support results you can verify.
Akuracy |
-
Flexural strength of concrete: the beam test explained
Pavement and slab designs often rely on flexural strength, not just cube strength. Here is how the concrete beam test is set up, run and calculated.
Ameet Kudche |
-
The Vickers hardness scale (HV): meaning and notation
The Vickers hardness scale, written as HV, expresses a material’s resistance to indentation under a specified test force.
Akuracy |
-
Erichsen testing machine selection for sheet metal labs
An Erichsen testing machine evaluates the formability of sheet metal by pressing a punch into a clamped specimen and recording the result of the cupping test.
Akuracy |
-
The Informed Buyer’s Toolkit: Knowing What to Ask Universal Testing Machine Manufacturers
When navigating the intricate market landscape of material testing machines, it's essential to equip yourself with the right questions. Universal Testing Machines (UTM) are invaluable in evaluating the mechanical properties...
Madhav Shastri , Material Science Expert |
