Pendulum impact tester verification: what ISO 148-2 checks
An impact tester needs more than a dial check. Here is what direct and indirect verification under ISO 148-2 covers and why both matter.
Ameet Kudche |
News
Pendulum impact tester verification: what ISO 148-2 checks
-
Spring rate testing: measuring load and deflection of compression and tension springs
A practical guide to testing springs for load at height, deflection and spring rate, and to the errors that make spring results drift.
Ameet Kudche |
-
How to select platens and fixtures for a compression testing machine
Match frame capacity to the specimens you will test Choose capacity from the expected failure load of the largest specimen, its dimensions, testing frequency and likely future applications—not from a...
Raghav Menon |
-
Compression testing machine calibration: what to verify
Compression testing machine calibration checks whether the machine’s indicated force agrees with a suitable reference across the range covered by the calibration.
Akuracy |
-
Extensometers explained: mechanical, electronic and non-contact video
Crosshead travel is not strain. Here is how mechanical, electronic and non-contact video extensometers work, and how to pick one for your tensile tests.
Ameet Kudche |
-
Choosing a Vickers microhardness tester for your application
A Vickers microhardness tester measures hardness by pressing a diamond pyramid into a prepared surface under a selected test force, then evaluating the indentation.
Raghav Menon |
-
Charpy impact energy: calculation and result reporting
A Charpy result is usually reported as the energy absorbed when a pendulum breaks a notched specimen.
Raghav Menon |
-
Future-Proofing Your Investment: Key Considerations for Material Testing Machine Purchases
In an ever-evolving industrial landscape, investing in the right material testing machines is crucial for quality assurance and operational efficiency. Whether you are in the market for a Universal Testing...
Madhav Shastri , Material Science Expert |
-
Brinell hardness calculation: formula, inputs and steps
How do you calculate Brinell hardness? Use the applied force, the ball diameter and the measured diameter of the indentation in a formula that relates force to the curved surface...
Raghav Menon |
-
How to evaluate a weld bend tester for laboratory work
A weld bend tester should be selected around the applicable test method, specimen dimensions and required tooling—not a headline force rating alone.
Raghav Menon |
-
From Plant to Prototype: How a Universal Testing Machine Manufacturer Builds True Trust
In the world of precision engineering, trust isn't just a value—it's a necessity. At the heart of this industry are Universal Testing Machines (UTMs), which ensure that materials meet industry...
Madhav Shastri , Material Science Expert |
-
Where dynamic balancing machines are used in industrial applications
Industrial plants use dynamic balancing machines wherever rotating components must be checked for uneven mass distribution, from motor rotors and fans to pumps and other production equipment.
Raghav Menon |
-
Planning equipment for a construction materials laboratory
A well-planned construction materials laboratory follows the work from sample receipt to a reviewed test report.
Raghav Menon |
-
Unveiling Industry Secrets: Evaluating the True Strength of Your Tensile Testing Machine Supplier
The world of material testing demands precision, reliability, and insightful analysis. It’s essential to partner with a Universal Testing Machine Manufacturer that not only understands these stringent demands but prioritizes...
Madhav Shastri , Material Science Expert |
