Hydraulic jacks and cylinders: inspection and safe use before site lifting
Before a hydraulic jack goes under a bridge girder or a machine base, check it. Here is a practical inspection and safe-use checklist.
Ameet Kudche |
News
Hydraulic jacks and cylinders: inspection and safe use before site lifting
-
Case depth measurement with a Vickers hardness tester
Effective case depth decides how a gear or shaft will wear. Here is how heat-treatment labs measure it with a Vickers hardness traverse.
Ameet Kudche |
-
What affects UTM installation, calibration, and training costs?
A computerized universal testing machine quote may separate installation, calibration, and operator training from the machine price, so the total depends on the scope and inclusions of each service.
Akuracy |
-
Erichsen cupping test: sheet metal formability explained
The Erichsen cupping test shows how far a sheet can be stretched before it cracks. Here is how it works and how to read the Erichsen index.
Ameet Kudche |
-
Hydraulic compression testing machine selection guide
A hydraulic compression testing machine applies compressive force to a specimen and records its response, such as the load reached and deformation during testing.
Akuracy |
-
UTM calibration to IS 1828 / ISO 7500-1: reading the certificate
A calibration certificate is more than a sticker. Learn what IS 1828 / ISO 7500-1 verification checks and how to read the results for your UTM.
Ameet Kudche |
-
The Vickers hardness test principle: force, indentation and measurement
The Vickers hardness test principle is to press a diamond indenter into a prepared surface with a specified force, measure the two diagonals of the resulting square-shaped impression, and calculate...
Akuracy |
-
Navigating the Precision Landscape: Selecting a Tensile Testing Machine with Proven Experience
In the realm of material testing, precision equipment is not just a requirement—it's a cornerstone of credible results and operational efficiency. Selecting the right machinery can be daunting, but understanding...
Madhav Shastri , Material Science Expert |
-
Testing TMT rebar to IS 1786: tensile, bend and rebend on a UTM
How construction and rolling-mill labs test TMT bars to IS 1786: tensile properties, bend and rebend tests, gripping and records.
Ameet Kudche |
-
Working principle of a Rockwell hardness testing machine
The rockwell hardness testing machine working principle is based on measuring how far an indenter penetrates a specimen under a defined force cycle.
Akuracy |
-
Portable hardness testing: when to test on site and how to get reliable readings
Some parts are too big or too valuable to bring to a bench tester. Here is how portable hardness testing works and how to keep field readings reliable.
Ameet Kudche |
-
Minimum specimen thickness for a Charpy test
The answer to “what is the minimum thickness required for a Charpy test” depends on the governing standard and whether it permits a sub-size specimen.
Akuracy |
-
Building Long-Term Success: Prioritizing Longevity and Reliability in Dynamic Balancing Machines
In an era where technology evolves at a rapid pace, ensuring the longevity and reliability of industrial equipment is crucial for sustained business success. This is particularly true for dynamic...
Madhav Shastri , Material Science Expert |
-
IS 1608 tensile test of metals: procedure, specimen and report
What IS 1608 Part 1 covers, how specimens and gauge lengths are chosen, how the test is run on a UTM and what a compliant report should include.
Ameet Kudche |
