Buying a refurbished or second-hand UTM: what to inspect
A used UTM can be a sensible buy if you inspect the right things. Here is a checklist for the frame, hydraulics, measurement and paperwork.
Ameet Kudche |
News
Buying a refurbished or second-hand UTM: what to inspect
-
How to prepare a concrete cube mould testing setup
A concrete cube mould testing setup checklist should cover mould condition, dimensions, cleaning, release oil, casting records and the testing machine setup.
Akuracy |
-
Pendulum impact tester verification: what ISO 148-2 checks
An impact tester needs more than a dial check. Here is what direct and indirect verification under ISO 148-2 covers and why both matter.
Ameet Kudche |
-
Izod impact testing standards and method requirements
Which standard applies to Izod impact testing? ASTM D256 and ISO 180 are key standards associated with Izod testing, but the right choice depends on the material and the test...
Akuracy |
-
How R&D Investments Impact the Quality of Your Universal Testing Machine
In the competitive landscape of material testing, investing in Research and Development (R&D) is crucial for a Universal Testing Machine (UTM) manufacturer. By understanding how R&D investment directly correlates to...
Madhav Shastri , Material Science Expert |
-
Charpy and Izod notch preparation: why a notch broaching machine matters
A tiny change in notch radius can change Charpy results. Here is how notch broaching machines produce consistent notches and how to check them.
Ameet Kudche |
-
Which rotor balancing machine specifications should you verify?
Rotor balancing machine specifications for industrial rotors should match the rotor’s mass, dimensions, support geometry, operating speed, required balance quality and correction method.
Akuracy |
-
Balance quality grades explained: using ISO 21940-11 for rigid rotors
G6.3, G2.5, G1: what balance grades mean and how to turn one into a residual unbalance tolerance your balancing machine can check.
Ameet Kudche |
-
Brinell hardness testing machine compared with Rockwell and Vickers testers
A Brinell hardness testing machine measures a material’s resistance to indentation using a ball indenter; choose it when the test method, specimen size and surface condition suit your application.
Akuracy |
-
Transparent Trust: Recognizing Genuine Market Reputation in Universal Testing and Balancing Machines
In today's highly competitive industrial landscape, the authenticity and reliability of a company’s products are pivotal. The Universal Testing Machine (UTM), a cornerstone for quality assurance in engineering and manufacturing...
Madhav Shastri , Material Science Expert |
-
Case depth measurement with a Vickers hardness tester
Effective case depth decides how a gear or shaft will wear. Here is how heat-treatment labs measure it with a Vickers hardness traverse.
Ameet Kudche |
-
What affects UTM installation, calibration, and training costs?
A computerized universal testing machine quote may separate installation, calibration, and operator training from the machine price, so the total depends on the scope and inclusions of each service.
Akuracy |
-
Erichsen cupping test: sheet metal formability explained
The Erichsen cupping test shows how far a sheet can be stretched before it cracks. Here is how it works and how to read the Erichsen index.
Ameet Kudche |
