Discover the Power of Durability, Stability and Precision From Akuracy , a brand fully owned by Ratnakar Enterprises Jointly With Balaji Industries.

We offer high-quality products with unbeatable Innovative technologies and flexibility.

Our commitment to excellence is unmatched. Enjoy the benefits of our top-notch products today!

How to calculate impact strength: formula and test method

How to calculate impact strength: formula and test method

Akuracy |

Written by
Akuracy
20 Nov 20266 min read

The answer to “how do I calculate impact strength?” starts with the energy absorbed when a specimen breaks and the specimen’s dimensions at the fracture section. Divide the absorbed energy by the relevant cross-sectional area, but confirm the test method first: Charpy and Izod setups and reporting conventions are not interchangeable.

How to calculate impact strength from test results

Impact testing machine, fractured metal bars, digital calipers, clipboard, and safety glasses

For a common energy-per-area calculation, divide the specimen’s absorbed impact energy by its cross-sectional area beneath the notch. Use the dimensions and reporting convention specified for the chosen test method.

How do I calculate impact strength?

Use this formula when the test method calls for impact strength to be reported as absorbed energy per unit area:

Impact strength = absorbed energy ÷ cross-sectional area at the notch

The absorbed energy is the energy used to fracture the specimen, as determined by the impact test. The relevant area is generally the remaining cross-section beneath the notch—the section that resists the blow. Confirm the method’s instructions for the exact dimensions to use; the formula and reporting convention can vary by method and material.

To calculate a result:

  1. Record the absorbed energy from the test, in joules.
  2. Measure the specimen dimensions needed to calculate the cross-section at the notch.
  3. Calculate that area using consistent units.
  4. Divide the absorbed energy by the area.
  5. Report the value with its units and the test method used.

For example, if a specimen absorbs 12 J and the specified cross-sectional area is 80 mm², the calculation is 12 ÷ 80 = 0.15 J/mm². Because 1 J/mm² equals 1,000 kJ/m², the same result is 150 kJ/m².

This example shows the arithmetic only. It does not establish which dimensions, specimen geometry, or reporting unit apply to a particular test. Follow the relevant method so another person can understand how the result was obtained.

Some impact tests report absorbed energy directly in joules rather than dividing it by area. Don’t convert a result to energy per area unless the applicable method calls for that calculation. When comparing materials, include the test method and specimen details with the result: a number without that context can be misleading.

What is the unit for impact strength?

The unit follows from the calculation. If absorbed energy is divided by area, common forms include J/mm², kJ/m², and J/cm². If the result is reported as absorbed energy alone, the unit is usually joules.

Make sure the energy and area units are compatible before calculating. For instance, dividing joules by square millimetres gives J/mm², not J/m². Convert the units if you need to compare values expressed in different forms, and state the final unit clearly.

A useful report records the method, specimen dimensions, notch details, absorbed energy, calculated value, and units. Include any test conditions required by the method. This makes it easier to distinguish a genuine difference in material response from a difference in how specimens were prepared or tested.

What impact strength measures

Metal impact tester above a fractured sample with broken pieces nearby

Impact strength describes a material’s response to sudden loading, commonly expressed as energy absorbed per area or as absorbed energy, depending on the test method.

What is impact strength?

Impact strength indicates how much energy a specimen absorbs during an impact test before it fractures. The test uses a sudden blow, unlike a tensile test that applies a gradually increasing pulling load.

Impact strength is not the same as impact force. Force describes an interaction during the blow; impact strength is a material-test result derived from the specimen’s response. Nor is it always interchangeable with impact toughness. These terms can be used differently across technical contexts, so check how a report defines the value and which method produced it.

A calculated result is meaningful in relation to the specimen and method used. Material type, specimen geometry, notch, and test setup can affect the measured outcome. Use the result to compare specimens tested under suitably aligned conditions rather than treating it as a universal rating.

Choose a Charpy or Izod impact test

Impact testing machines in a materials laboratory

Charpy and Izod are common pendulum impact-test methods, but their specimen support and setup differ; identify the method before calculating or comparing results.

How Charpy and Izod results differ

In a Charpy test, the specimen is supported at both ends and struck between the supports. In an Izod test, the specimen is held vertically as a cantilever and struck above its fixed end. The notch orientation and the position of the impact are set by the test method.

Both methods can use the energy absorbed during fracture, but differences in support, notch orientation, and setup mean their results should not be treated as directly interchangeable. A Charpy value and an Izod value for the same material do not form a like-for-like comparison simply because both describe impact behaviour.

For either method, check the test instructions for the required specimen dimensions, notch geometry, orientation, and reporting basis. If the method reports absorbed energy, report that in its stated unit. If it requires energy per area, use the specified area and report the resulting unit. A Charpy impact testing machine is one type of equipment used for impact testing; equipment selection still needs to match the method and specimen requirements.

How impact strength relates to steel and tensile strength

For steel, impact strength refers to the result of a specified impact test on a defined specimen; tensile strength comes from a different test and describes a different response.

What is impact strength in steel?

An impact-strength result for steel describes the energy absorbed by a steel specimen under the chosen impact-test conditions. To interpret it, identify the test method, specimen shape and dimensions, notch, and reported units. Without those details, the number alone does not establish how one steel result compares with another.

A steel impact result is not a substitute for tensile properties. If a material specification calls for both impact and tensile testing, each result answers a different question and should be evaluated against its applicable requirements.

What is the difference between tensile strength and impact strength?

Tensile strength relates to a material’s response when it is pulled, while impact strength relates to its response to a sudden blow. A material may have a tensile-strength result that describes resistance to gradual loading, but that value does not calculate or predict its impact-test result.

To obtain a tensile result, use an appropriate tensile test and report the specified tensile measure. To obtain impact strength, use the applicable impact-test method and its specimen and calculation requirements. Results from one type of test cannot be substituted for the other.

What are the three types of tensile strength?

Common tensile measures include yield strength, ultimate tensile strength, and breaking strength. They describe different points or outcomes in a tensile test; none is a measure of impact strength.

Use the measure required for the material specification or test report, and keep it distinct from energy absorbed during an impact test. A tensile-testing machine and an impact-testing machine serve different test methods.

Impact Strength FAQs

How do you calculate impact force?

Impact force is not calculated by dividing absorbed energy by specimen area; that calculation gives an energy-per-area impact result. Force during an impact depends on the test setup and how force is measured over the event.

How do you calculate the strength of a material?

There is no single formula for material strength: the calculation depends on the property and test, such as tensile strength from a tensile test or impact strength from an impact test. Use the applicable method and report its specimen details and units.

Use the test method to interpret your result

To interpret an impact result, match the calculation, specimen dimensions, and test setup to the applicable Charpy or Izod method, then compare only results with aligned conditions.

  1. Identify whether the required test is Charpy or Izod and confirm the method’s specimen and setup requirements.
  2. Measure the specimen dimensions at the specified fracture section, including the relevant area beneath the notch if the method requires energy per area.
  3. Record the absorbed energy and calculate the result using the method’s formula and units.
  4. Label the result with the test method, specimen details, and reporting unit.
  5. Compare results only when the methods and relevant specimen and test conditions align, and consult the applicable specification when acceptance criteria are involved.

For more context on how impact behaviour informs material selection, read our guide to impact strength for material selection.