S355JR vs S355J2: What Impact Test Temperature Means for Charpy
The letters after S355 tell you the Charpy test temperature: JR at +20 °C, J0 at 0 °C, J2 at −20 °C. Here is what that means for testing, specimen...
Ameet Kudche |
The letters after S355 tell you the Charpy test temperature: JR at +20 °C, J0 at 0 °C, J2 at −20 °C. Here is what that means for testing, specimen...
Ameet Kudche |
The rockwell hardness testing machine working principle is based on measuring how far an indenter penetrates a specimen under a defined force cycle.
Akuracy |
Some parts are too big or too valuable to bring to a bench tester. Here is how portable hardness testing works and how to keep field readings reliable.
Ameet Kudche |
The answer to “what is the minimum thickness required for a Charpy test” depends on the governing standard and whether it permits a sub-size specimen.
Akuracy |
In an era where technology evolves at a rapid pace, ensuring the longevity and reliability of industrial equipment is crucial for sustained business success. This is particularly true for dynamic...
Madhav Shastri , Material Science Expert |
What IS 1608 Part 1 covers, how specimens and gauge lengths are chosen, how the test is run on a UTM and what a compliant report should include.
Ameet Kudche |
A digital Rockwell hardness testing machine should match the scales and samples you test, provide a controlled test cycle, and support results you can verify.
Akuracy |
Pavement and slab designs often rely on flexural strength, not just cube strength. Here is how the concrete beam test is set up, run and calculated.
Ameet Kudche |
The Vickers hardness scale, written as HV, expresses a material’s resistance to indentation under a specified test force.
Akuracy |
An Erichsen testing machine evaluates the formability of sheet metal by pressing a punch into a clamped specimen and recording the result of the cupping test.
Akuracy |
When navigating the intricate market landscape of material testing machines, it's essential to equip yourself with the right questions. Universal Testing Machines (UTM) are invaluable in evaluating the mechanical properties...
Madhav Shastri , Material Science Expert |
A practical guide to testing springs for load at height, deflection and spring rate, and to the errors that make spring results drift.
Ameet Kudche |
Match frame capacity to the specimens you will test Choose capacity from the expected failure load of the largest specimen, its dimensions, testing frequency and likely future applications—not from a...
Raghav Menon |
Compression testing machine calibration checks whether the machine’s indicated force agrees with a suitable reference across the range covered by the calibration.
Akuracy |