S355JR vs S355J2: What Impact Test Temperature Means for Charpy
The letters after S355 tell you the Charpy test temperature: JR at +20 °C, J0 at 0 °C, J2 at −20 °C. Here is what that means for testing, specimen...
Ameet Kudche |
The letters after S355 tell you the Charpy test temperature: JR at +20 °C, J0 at 0 °C, J2 at −20 °C. Here is what that means for testing, specimen...
Ameet Kudche |
ISO 9513 grades extensometers into classes by their errors. Here is what class 0.5 and class 1 allow in microns, which class a tensile test to ISO 6892-1 needs, and...
Ameet Kudche |
Static unbalance can be fixed in one plane; couple and dynamic unbalance need two. Here is how to tell them apart, why it matters for fans, rotors and crankshafts, and...
Ameet Kudche |
An 8.8 bolt has a nominal tensile strength of 800 MPa and a 640 MPa yield. Here is how a QC lab checks tensile strength, proof load and HRC hardness...
Ameet Kudche |